ATF601+Auto Transmission Cleaner and Fluid Exchanger

Equipped with a convenient used oil sampling function
Can be used with smart terminals for remote control
Automatically identify the oil inlet and outlet direction of the transmission
Equipped with a variety of special adapters, suitable for models in various countries
Supports adding cleaning agents to perform cyclic cleaning of automatic transmissions
Intelligent electronic control automatically replaces new and used oil in equal amounts
Provides a rich database of vehicle models, eliminating the need to manually set the oil volume
Equipped with oil temperature display and oil filter replacement reminder function

What Can Be Solved in Your Shop

Used Oil Sampling

Automatically collects used oil from the transmission.

Transmission Oil Level Adjustment

Customizes oil level adjustments, refilling or draining the set transmission oil amount.

Transmission Oil Replacement

Automatically identifies transmission inlet and outlet ports, enabling equal-volume replacement of transmission oil.

Transmission Oil Circulation Cleaning

Cleaning agent can be added to perform cyclic cleaning of the automatic transmission.

Draining used and new oil from equipment

It can automatically drain the transmision oil in the new and used oil barrels of the equipment.

Vehicle model data customization

Supports custom addition of common automatic transmission maintenance vehicle model data.

Printing

Supports printing of equipment execution results and customisable repair shop information.

Remote Control

Supports connection with Android tablets to remotely control device operation.

Enquire Now

Parameters

Power Supply	AC 110V/AC 220V 50Hz/60Hz	Filter accuracy	5μm
Maximum power	3500W	Oil change rate	2L/Min
Pressure gauge	0~200psi	Oil tank	20L×2
Oil outlet pipe	2.5m	Equal replacement error	±100ml
Oil return pipe	2.5m	Ambient temperature	-10℃~+50℃
Oil drain pipe	1.2m	Filter element service life	About 1 year (once used per day on average)
Relative humidity	<90%

Pay attention to each connection to check if there is any leakage during fluid exchange. When any leak is found, stop the ATF601 immediately and check for the unit. Start to exchange fluid again after reconnection is made.
Before cleaning up the unit, the used fluid should be drained out from the used fluid tank and the new fluid should be drained out from the new tank and stored in the container after every usage to protect the electronic scale on the no-load state at non-work conditions.
Keep the new fluid tank clean.
Please recalibrate the electronic scale after replacing the main-board and/or the electronic scale itself.

If you have any questions, please don't hesitate to contact us by filling out the form or reaching out through our communication channels.

Products

Electric Vehicle

Company

COntact