CE39

EV Diagnose, Equalize & Charge/Discharge Equipment

CE39

About CE39

CE39 is the industry's first four-in-one EV diagnostic and maintenance equipment that integrates vehicle diagnostics, battery cell equalization and module charging/discharging.
  • Supports simultaneous operation of diagnosis and equalization and charging/discharging.
  • Supports whole-vehicle diagnosis, covering full-system detection for over 95% of electric vehicle models.
  • Supports offline testing of batteries, motors and electronic controls.
  • Supports offline testing of compressor, DCDC and OBC.
  • Supports intelligent equalization technology, enabling synchronous equalization of 24 battery cells.
  • Supports 40A high current, significantly improving work efficiency.
  • Supports remote monitoring of equipment, allowing real-time tracking of operational status.
Comprehensive whole-vehicle diagnosis
Covering over 95% of electric vehicle models, it supports full-function diagnostics,
including code reading, code clearing, data stream reading, actuator tests, and special functions. It enables real-time data stream monitoring and visually presents the communication network and fault points through a vehicle topology diagram, ensuring precise diagnosis and fault localization.
Professional testing and maintenance for battery, motor, electric control, compressor, DCDC, and OBC
Supports offline diagnostics for high-voltage core components such as DC converters, onboard chargers, air conditioning compressors, PTC heaters, and motor controllers. It enables offline reading of data streams and fault codes.
Built-in control board fault code repair guidelines
Providing troubleshooting ideas, circuit schematics, control board topology diagrams, guided repair.
Battery pack deep inspection
Supports reading soc/soH,individual cell/module voltage,temperature, and fault informationAutomatically calculates key indicators such as total voltage and voltage difference, and marks abnormal data.
Precise cell equalization
It supports synchronous equalization of 24 battery cells and is compatible with mainstream battery types such as ternary lithium, lithium iron phosphate, and lithium titanate.
High-current efficient charging and discharging
Supports 40A charging and 20A discharging currents, quickly adjusts the battery cells to the target voltage, and meets the fast charging and discharging requirements of the battery pack.
Tablet Collaborative Interconnection
The lightweight host is equipped with a smart tablet, which supports simultaneous diagnosis and equalization operations, and real-time monitoring of equalization progress, charge and discharge curves, and device status.
Multiple security protections
Built-in overvoltage, undervoltage, overcurrent, short circuit, reverse connection and over-temperature protection mechanisms ensure the safe operation of the device and battery.
OTA remote upgrade
Support remote firmware upgrade and function module iteration.

Parameters

Tablet parameters
Display10.1 inches, resolution 800×1280Charging methodType-C, contact charging
CPU2.0GHz octa-coreInterfaceUSB2.0-TypeA×1, USB2.0-TypeC×1, DC-IN port, charging base contact
Memory4GBCommunicationWi-Fi, Bluetooth, USB
Storage128GBSize295.9×196×38.6mm
SystemAndroidED BOX operating voltageDC 9~18V
Wi-Fi2.4GHz/5GHz Dual BandED BOX communication methodBluetooth
Battery9360mAh/3.8V lithium batteryED BOX size112×72.5×32.5mm
Host parameters
Power inputAC 90~264V/50~60HzEqualization interface12PIN×1, 13PIN×1
Battery module voltage rangeDC 0~112VCharging controlConstant voltage charging, constant current charging
Cell voltage range1.5~5VDischarge controlConstant current discharge, constant voltage discharge
Charging current range0.5~40A, maximum power 3.2KWBattery module charge and discharge protectionBattery module overcharge and over-discharge protection, over-temperature protection
Discharge current range0.1~20A, maximum power 2.4KWReverse polarity protectionSupport
Single cell voltage accuracy±0.1%FS±5mV (maximum range 5V)Over-temperature protectionCooling box over-temperature 85℃ protection
Single cell current accuracy±0.5%FS±0.05A (maximum range 20A)Host protectionOver-temperature, over-current, and current out-of-control trigger shutdown protection
CommunicationWi-Fi, BluetoothNumber of equalization channels2×12
Abnormal protectionPower line power failure, main cable power failure

Maintenance tips

Documents

SmartSafe CE39 EV Diagnose, Equalize & Charge/Discharge Equipment Product Catalog
SmartSafe CE39 EV Diagnose, Equalize & Charge Discharge Equipment User's Manual

Have a Question?

If you have any questions, please don't hesitate to contact us by filling out the form or reaching out through our communication channels.
  • 1300 369 788
  • info@smart-safe.com.au
COntact
  • 0432739318 (Sales)
  • 0411527208 (Sales)
  • info@smart-safe.com.au
  • 5/51 Sterling Rd, Minchinbury NSW 2770 Australia
© 2024 SmartSafe. All rights reserved.

Submit Your Enquiry

Please complete the form below to continue.